If you're setting up a testing facility to analyse products or materials on a commercial basis, then you will want to ensure that your facility is completely fit for the purpose. You may be bringing in some particularly sensitive microscopes and want to ensure that they provide you with detailed and accurate information to help you to provide your service effectively. Consequently, you will want to protect those microscopes and make sure that they are not overly affected by external forces. This means that you will need to analyse and understand the level of vibration in your facility prior to installation. What do you need to think about?
Urban Environment
In an ideal world, the further you are away from external elements of potential sources of vibration, the better. This is not practical in most cases, however, as the typical commercial facility tends to be in an urban environment. There is a limit, therefore, to how much you will be able to limit externally generated vibration.
Isolation Systems
You can introduce local vibration isolation systems, which can be configured to host or hold the electron microscopes themselves. Sometimes these can be passive systems, such as a pneumatically floated slab, or they can be spring-based systems that form a cradle for the tool. These systems are quite technologically advanced and will certainly help to cut down problems related to micro-vibration in such a building.
Analysing Characteristics
Before you begin, however, you need to understand the particular characteristics of the microscope in question. Some types of microscopes can be far more sensitive to micro-vibrations at lower frequencies as opposed to higher ones, and the floor-based systems may not be equally effective in all situations. Then, you also need to understand the building itself and what type of vibration you're likely to encounter. If the building tends to deal with vibrations at a middle or higher frequency, then the isolation system tends to be far more effective.
Making Progress
In order for you to proceed, you should commission a test to determine the vibration frequencies in and around your building. Once you have the correct data, you'll be able to figure out how effective your microscope will be and whether or not you need to bring in additional tools or systems to help achieve your goal. Talk with someone at a vibration consultant service, and they will be able to help you plan your next move.
Share
